- 48V20A Smart 2G LoT with GPS BMS for Swappable Battery System
- 【Brief】:
Model No: ZBF48V20ATC4-2G-GPS
Features
1)Support RS485 for study the battery information and modified the firmware
2)Support 4 way temperature sensor for monitoring the battery group
3)Coulomb SOC algorithm and online self learning function, modify the SOC accurately
4)Intelligent dynamic balancing;
5)Support MOSFET failure detection function;
6)Support weak power switch on/off function ( external B+ input);
7)Support expansion of 2G/GPS module, bluetooth module and LCD display. - 【Series】:LoT Series
This series BMS is mainly design for 48V with less than 30A and 20A discharging and charging current lithium battery group. In this scheme, a low power with high precision processor is used to match the high accurately sampling chip for dynamic intelligent management of battery pack. This series applied the unique SOC & SOH algorithm, which can elvaluate the higher accurate SOC for large capacity battery packed. At the same time, the intelligent dynamic equalization to ensure the lithium batteries work in a stable state and prolong the life of batteries.
The 2G & GPS module accomplish the data transaction among the battery packed and iclould server. Then the server keep track the working condition of the battery group on time. It can judge the SOH of battery pack and alarm the user once the battery in abnormal status. At the same time, the GPS function can track the location of battery group on time.
2.Application Scope
48V (16S ) lithium battery packed
No |
Item |
Condition |
Specification |
1 |
Input Voltage |
Input Voltage B+ to B- |
61V |
2
|
State of Charging(SOC)
|
Battery cell voltage accuracy |
±20mV |
Battery Packed voltage accuracy |
±300mV |
||
Current accuracy rate |
±3% |
||
SOC accuracy rate |
±10% |
||
3 |
Overcharge(Single CELL) |
Protection voltage |
3850±30mV |
Recovery voltage |
3600±30mV |
||
Protection delay time |
1000±300mS |
||
5 |
Over discharge( Single CELL) |
Protection voltage |
2300±30mV |
Recovery voltage |
2500±30mV |
||
Protection delay time |
1000±300mS |
||
7 |
Primary Over discharge current |
65A±3%A |
|
Primary delay time |
2S±300mS |
||
8 |
Secondary Over discharge current |
Secondary Over current |
80A±3%A |
Secondary delay time |
500mS±300mS |
||
9 |
Over charge current |
Over current |
20A±3%A |
Delay time |
5S±300mS |
||
10 |
Communication feedback delay time |
Delay time before sleeping mode |
≤100mS |
Delay time under sleeping mode ( At least two command issued, the first is activated the communication and the second is data responese) |
≤100mS |
||
11
|
Short circuit protection delay time
|
Short circuit protection delay time |
200~600uS |
Recovery Conditions |
Shut down the loading and charging again |
||
12
|
Temperature protection
|
High Temperature Protection in Discharging (±3℃) (Cell temperature) |
65℃ |
High Temperature Recovery in Discharging (±3℃) (Cell temperature) |
60℃ |
||
Low Temperature Protection in Discharging (±3℃) (Cell temperature) |
-25℃ |
||
Low Temperature Recovery in Discharging (±3℃) (Cell temperature) |
-20℃ |
||
High Temperature Protection in Charging (±3℃) (Cell temperature) |
55℃ |
||
High Temperature Recovery in Charging (±3℃) (Cell temperature) |
50℃ |
||
Low Temperature Protection in Charging (±3℃) (Cell temperature) |
-5℃ |
||
Low Temperature Recovery in Charging (±3℃) (Cell temperature) |
0℃ |
||
High Temperature Protection in Charging and Discharging (±3℃) (Mosfet temperature) |
85℃ |
||
High Temperature Recovery in Charging and Discharging (±3℃) (Mosfet temperature) |
75℃ |